The ECS-6216P is the main primary output zone module that allows the addition of 16 output zones to the system 6000. Up to 160 outputs zone capacity is possible with the addition of up to 9 additional ECS-6216S. Each unit also offer an addition of 16CH GPI sensor input for messaging, event and scenario triggering.
- INTEGRATED SYSTEM
System consists of EMERGENCY SWITCHER, MATRIX, RELAY GROUP, SPEAKER SELECTOR, and
TERMINAL BOARD functions.
- BROADCAST CONTROL DEPENDING ON PRIORITIES
It controls the priority broadcasting by connecting to emergency panel (EP-6216) and remote MIC (RM-6024).
It switches to remote or emergency broadcasting due to priorities of emergency signals or outside remote signals
(remote MIC broadcasting signals) even if during general broadcasting.
- AUTOMATIC FIRE DETECTING FUNCTION
With 16-channels corresponding to fire contact point signals, fire alarm broadcasting will be
- MANUAL CONTROL OF EMERGENCY AND GENERAL BROADCASTS
It can broadcast to desired channels by manually selecting emergency or general broadcasting.
- DISPLAY BROADCASTING STATUS
It displays the priority and broadcasting status on LED, so user can verify the broadcasting status
without any effort.
- MEMORY/SAVE FUNCTION
Fire/RM Macro information will be saved in internal PC memory allowing for normal
operation in event of PC error.
- CHANNEL EXPANSION AND RS-485 COMMUNICATION INTERFACE
Long distance transmission is available and system can be expanded to 160 Zones by utilizing ECS-6216S.
- INSTALLATION TIME AND SPACE
Since it is an integrated system, it is easy to install and can save installation labor, time and space.
|Priority||Emergency>Timer>Remote 1>Remote 2>Main|
|Communications Protocol||LINK IN/OUT||RS-485 (Maximum: 1km/3,280 feet)|
|RM INPUT (RM1, 2)||RS-422 (Maximum: 1km/3,280 feet)|
|SOURCE||RS-232 (Maximum: 12m/40 feet)|
|Fire Sensor||Dry Contact|
|Operating Temperature||-10°C ~ +40°C/14°F~104°F|
|Power Source||DC 24V, 900mA|