The ECS-6216S output slave unit allow the addition of 16 output zones to the single bus system 6000. Up to 9 units can be added to the ECS-6216P, giving the system up to 160 output zone capacity. Each unit also offer 16CH GPI sensor input for messaging, event and scenario triggering.
- INTEGRATED SYSTEM
System consists of EMERGENCY SWITCHER, MATRIX, RELAY GROUP, SPEAKER SELECTOR, and
TERMINAL BOARD functions.
- BROADCAST CONTROL DEPENDING ON PRIORITIES
It controls the priority broadcasting by connecting to emergency panel (EP-6216) and remote MIC (RM-6024).
It switches to remote or emergency broadcasting due to priorities of emergency signals or outside remote signals
(remote MIC broadcasting signals) even if during general broadcasting.
- AUTOMATIC FIRE DETECTING FUNCTION
With 16-channels corresponding to fire contact point signals, fire alarm broadcasting will be
- MANUAL CONTROL OF EMERGENCY AND GENERAL BROADCASTS
It can broadcast to desired channels by manually selecting emergency or general broadcasting.
- DISPLAY BROADCASTING STATUS
It displays the priority and broadcasting status on LED, so user can verify the broadcasting status
without any effort.
- MEMORY/SAVE FUNCTION
Fire/RM Macro information will be saved in internal PC memory allowing for normal
operation in event of PC error.
- CHANNEL EXPANSION AND RS-485 COMMUNICATION INTERFACE
Long distance transmission is available and system can be expanded to 160 Zones by utilizing ECS-6216S.
- INSTALLATION TIME AND SPACE
Since it is an integrated system, it is easy to install and can save installation labor, time and space.
|Priority||Emergency>Timer>Remote 1>Remote 2>Main|
|Communications Protocol||LINK IN/OUT||RS-485 (Maximum: 1km/3,280 feet)|
|RM INPUT (RM1, 2)||RS-422 (Maximum: 1km/3,280 feet)|
|SOURCE||RS-232 (Maximum: 12m/40 feet)|
|Fire Sensor||Dry Contact|
|Operating Temperature||-10°C ~ +40°C/14°F~104°F|
|Power Source||DC 24V, 900mA|