NLA Series is designed for line array so it is possible to use in diversity locations. The 8” high quality of low sound driver was settled and two of 1” high output titanium tweeter is installed at waveguide so it can be made line sound of high level for necessary source of line array.
Base on the 1 degree, Each speaker can be controlled the degree from 0 to 10 degree and the degree of array is decided according to top and bottom angle of each speaker.
The high output tweeter that is installed in waveguide passes on stable sound signal to 90 degree of wide range and clearer sound can be played using by paging plug. When the is composed, the arrangement of only NLA-8 can play wide range of frequency.
For music performance and other events, it is possible to install with sub woofer, NLA-18S, as flying type or ground stack to reinforce low sound.
The cabinet of NLA-18S is made by premium Birch plywood which is made in North Europe and the front panel is manufactured by steel grill. Also, the handle grips are settled on the right and left sides for carrying with flying tools made by steel. The installment of frying speak can make through this frying tools.
The two pieces of NL4 connectors can be connect with power amplifier by directly or connect with speaker in parallel.
|Type||2Way Passive Line Array||2Way Bi-amp Line Array|
|Frequency Range (-10dB)||74Hz~18kHz||75Hz~18kHz|
|Rated Power (AES)||150W||LF : 440W/HF : 60W|
|Rated Power (Program)||300W||LF : 900W/HF : 120W|
|Rated Power (Peak)||600W||LF : 1600W/HF : 240W|
|Recommended Amplifier Power||300W||LF : 900W/HF : 120W|
|Sensitivity (1W/1m)||93dB SPL||LF : 98dB SPL/HF : 110dB SPL|
|Maximum SPL (Peak)||120dB SPL||LF : 130dB SPL/HF : 133dB SPL|
|Norminal Dispersion (H/V)||90° H/10° V||90° H/10° V|
|Nominal Impedance||16 Ω||LF: 16 Ω/HF: 16 Ω|
|Recommended High-Pass Filter||80Hz,24dB/Oct.LR Filter||80Hz,24dB/Oct.LR Filter|
|LF Driver||2x5" Woofer (Faital PRO)||2x8" Woofer (EMINENCE USA)|
1" Titanium (B&C)
1" Titanium (B&C)
|Horn||Constant directivity horn with Precision waveguide||Constant directivity horn with Precision waveguide|
|Enclosure Material||15T Eucalyptus||15T Eucalyptus|
|Grill||Powder Coated Punching Metal||Powder Coated Punching Metal|
|Connectors||2xSpeakon SP4||2xSpeakon SP4 (1+,1- : LF/2+,2- : HF) [Parallel]|
|Fittings/Suspension||4 Point Flying Rigging 0°~10° variable angle (5°step), screwtype||4 Point Flying Rigging 0°~10° variable angle (1°step), screwtype|
|Finish||Textured black RoHS compliant paint||Textured black RoHS compliant paint|
|Weights (Net)||477x181x308mm (18.8x7.1x12.1in)||694x256x486mm (27.2x10.1x19.1in)|
|Dimensions (Net, WxHxD)||11.4kg/25.1lb||24.4kg/53.8lb|
|Optional Accessories||NLA-5 Frame||NLA-8 Frame|