- AUTOMATIC EM SCENARIO BROADCAST
• The automatic evacuation broadcasting function to assist fast and safe evacuations from fire. It uses the
optimized scenario which is pre-set depending on fire locations to minimize casualties by providing the first
priority zone to be evacuated, evacuation directions for each zone, and ways to evacuate from the initial fire
location based on time interval.
• As a critical component in the emergency system, it can prevent delayed responses due to possible lack of an
operator or through unskilled operation.
- BYPASS FUNCTION
Allows for conversion to basic evacuation broadcast or operator control.
- PC BACKUP
Scenario data written to PC is saved in built-in memory; no problems will occur as a result of a PC failure.
- 99 MESSAGES CAPACITY
PV-6232 (VOICE FILE) enables use of 99 messages.
- SYSTEM EXPANSION
Through RS-485 communication, it can be expanded to maximum 10 systems.
|Communications Protocol||LINK IN/OUT||RS-485 (Maximum 1km/3,280 feet)|
|VOICE FILE||RS-232 (Maximum 12m/40 feet)|
|Fire Sensor||Dry Contact|
|Operating Temperature||-10°C ~ +40°C / 14°F ~ 104°F|
|Power Source||DC 24V, 100mA|