The AFD-6218 is designed to be installed to detect power amplifier failures and automatically switches to spare amplifier.
- Automatic Check
Check the status of amp connected to each channel automatically according to the time-set.
- Display Amp Status
Display the status of amp connected to each channel by LED
- Automatic Change
Channel which fault occurs when checking out the amp will be switched to spare amp automatically.
- Check Time setup
You can set up 5 different time intervals for automatic self check.
|Amp Input||9 Channels (Spare 1 Channel)|
|Amp Output||9 Channels (Spare 1 Channel)|
|Audio Input||8 Channels|
|Operation Temperature||-10℃ ~ +40℃|
|Power Source||DC +24V, 170mA|
|LINK IN/OUT Cable||UTP Cable (500mm)|