NLA-5 is designed in compact size to avoid the limitation of line array speaker in small-sized venue. Two units of 5” high performance woofer driver are equipped with individual housing, and one 1” high power titanium compression driver is equipped with waveguide to form a line sound of upper range for line array speaker.
For NLA-5, several cabinets are supposed to be vertically arrayed, and the maximum quantity of the unit is 8 pieces. Each speaker can be adjusted from 0° to 10° vertically, and different type has different increment unit: Bolt type is 5°, and pin type is 1°. According to each speaker’s vertical angle adjustment, the whole speaker array’s direction angle is decided.
In full range array composition, it is able to play wide frequency with NLA-5 array speaker, and also user can add NLA-15S subwoofer for concert and event which need more powerful bass. The NLA-15S can be flying with NLA-5, or separately stacked to the ground. The front of NLA-5 is equipped with steel-made flying tools so that it can be hanging in the air. It supports two types of rigging for convenient installation: Bolt type and pin type. The rear of NLA-5 has two Speakon connectors for direct connection or parallel connection with power amplifier.
The NLA-5 are equipped with 2 parallel NL4 connectors for easy looping of the cabinet’s audio signal. One 2-channel amplifier can drive up to 8 cabinets. (4 cabinets per channel) The front grill is made of 14 gauge durable mesh and powder-coated for a durable finish. It supports bolt type and pin type for easy installation.
For applications where extended low frequency is required, the NLA-5 can be coupled with the matching NLA-15S subwoofer. The NLA-15S Subwoofer incorporates a single 15 inch front loaded woofer in a vented cabinet with a matching footprint to the NLA-5. The NLA-15S subwoofer cabinet can seamlessly be flown with the NLA-5 or installed in a ground stack. The NLA-15S subwoofer was designed specifically for use with the NLA-5 arrays and is suitable for small to medium sound reinforcement applications.
|Type||Dual 5"2Way Passive Line Array||15"Line Array Subwoofer|
|Frequency Range (±3dB)||122Hz ~ 20kHz||67Hz ~ 2.8kHz|
|Frequency Response (-10dB)||81Hz ~ 20kHz||28Hz ~ 3.5kHz|
|Rated Power (AES)||150W||600W|
|Rated Power (Program)||300W||1200W|
|Rated Power (Peak)||600W||2400W|
|Recommended Amplifier Power||300W||1200W|
|Maximum SPL (Peak)||120dB SPL||133dB|
|Nominal Dispersion||90° H/10° V||OMNI|
|Nominal Impedance||LF : 16Ω/HF : 8Ω||8Ω|
|Crossover Point||1,400Hz, 24dB/oct, LR Filter||100Hz, 24dB/oct, LR Filter|
|LF Driver||2 X Faitel Pro 5FE120 (5") Woofer with 32mm(1.26") voice coil||1 X EMINENCE KAPPA-15LFA (15") Woofer with 76 mm (3") voice coil|
|HF Driver||1 X B&C DE14-16 (1") Twitter with 36mm(1.4") voice coil||-|
|Horn||Line Array Module||-|
|Enclosure Material||EUCALYPTUS 15T, Textured black RoHS compliant paint||EUCALYPTUS 15T, Textured black RoHS compliant paint|
|Grille||SECC 1.5t, Powder Coating / BLACK||SECC 1.5t, Powder Coating / BLACK|
|Connection||2×Speakon SP4 (1+,1-) [Parallel]||2 X SPEAKON(1+,1-) [Parallel]|
0°~10° variable angle(1°step)
|4Point flying rigging|
|Finish||Textured black RoHS compliant paint||Textured black RoHS compliant paint|
|Dimensions (Net, W×H×D)||477×181×308mm/18.8×6.7×14.3in||477×518×741mm/18.8×19.9×29.2in|
|Optional Accessories||NLA-5 Frame (Bolt/Pin type)||NLA-5 Frame (Bolt/Pin type)|